Features

• For fixed code remote control duplication.
• Duplication and operation frequency 433,92 MHz / SAW Resonator
• Maximum range 60 m
• High endurance polycarbonate enclosure
• Multi coloured
• Size : 33 X 58 X 13mm
• SMD technology / CE Compliance

SM-50 is a transeiver so it can clone other Remote Controls of the same type.It can also generate a random new code to any of the given buttons.SM-50 it can store up to three (3) different codes, one for each button.

Store code in SM-50 (copy from other Remote Control)

1. Press all three buttons simultaneously and the LED turns on steadily.SM50 Is ready to be programmed.
2. Release all three buttons and the LED turns off.
3. Place the remote control we want to copy facing the one we program.
4. Holding the button of the remote control we want to program pressed, press the button of the remote control we want to copy.
5. When the LED of the SM-50 we want to program starts blinking the remote control has been coppied.
6. Release all buttons.SM-50 is programmed.

Store Random code on button

SM-50 can generate a new random code on each button or combination of two buttons as bellow.

1. Press all three buttons simultaneously and the LED turns on steadily.
2. Release all three buttons the LED turns off.
3. Press again all three buttons simultaneously and the LED turns on steadily.
4. Release all buttons except the one we want to program the random code.The LED starts blinking slowly. We keep the desired button pressed (for 10'’ )until the LED of SM-50 starts blinking quicker transmitting the code we have just programmed.
5. If something goes wrong repeat the entire procedure.